/*= -*- c-basic-offset: 4; indent-tabs-mode: nil; -*- * * librsync -- library for network deltas * $Id: rsync.h,v 1.1.1.1 2002/01/25 22:15:09 kergoth Exp $ * * Copyright (C) 2000, 2001 by Martin Pool * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU Lesser General Public License as published by * the Free Software Foundation; either version 2.1 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* | You should never wear your best | trousers when you go out to fight for | freedom and liberty. | -- Henrik Ibsen */ /** \file rsync.h * * \brief Main public interface to librsync. * \author Martin Pool * \version librsync-0.9.1 * * $Id: rsync.h,v 1.1.1.1 2002/01/25 22:15:09 kergoth Exp $ * * See \ref intro for an introduction to use of this library. */ #include extern char const rs_librsync_version[]; extern char const rs_licence_string[]; /** * \brief A long integer type that can handle the largest file * offsets. * * Perhaps this might have to be configured to be 'long long', 'long', * or something else depending on the platform. */ #if SIZEOF_LONG_LONG typedef signed long long rs_long_t; #else typedef long rs_long_t; #endif /** * \brief Log severity levels. * * These are the same as syslog, at least in glibc. * * \sa rs_trace_set_level() */ typedef enum { RS_LOG_EMERG = 0, /**< System is unusable */ RS_LOG_ALERT = 1, /**< Action must be taken immediately */ RS_LOG_CRIT = 2, /**< Critical conditions */ RS_LOG_ERR = 3, /**< Error conditions */ RS_LOG_WARNING = 4, /**< Warning conditions */ RS_LOG_NOTICE = 5, /**< Normal but significant condition */ RS_LOG_INFO = 6, /**< Informational */ RS_LOG_DEBUG = 7 /**< Debug-level messages */ } rs_loglevel; /** * \typedef rs_trace_fn_t * \brief Callback to write out log messages. * \param level a syslog level. * \param msg message to be logged. */ typedef void rs_trace_fn_t(int level, char const *msg); void rs_trace_set_level(rs_loglevel level); /** Set trace callback. */ void rs_trace_to(rs_trace_fn_t *); /** Default trace callback that writes to stderr. Implements * ::rs_trace_fn_t, and may be passed to rs_trace_to(). */ void rs_trace_stderr(int level, char const *msg); /** Check whether the library was compiled with debugging trace * suport. */ int rs_supports_trace(void); /** * Convert FROM_LEN bytes at FROM_BUF into a hex representation in * TO_BUF, which must be twice as long plus one byte for the null * terminator. */ void rs_hexify(char *to_buf, void const *from_buf, int from_len); /** * Decode a base64 buffer in place. \return the number of binary * bytes. */ size_t rs_unbase64(char *s); /** * Encode a buffer as base64. */ void rs_base64(unsigned char const *buf, int n, char *out); /** * \brief Return codes from nonblocking rsync operations. */ typedef enum { RS_DONE = 0, /**< Completed successfully. */ RS_BLOCKED = 1, /**< Blocked waiting for more data. */ RS_RUNNING = 2, /**< Not yet finished or blocked. * This value should never be returned * to the caller. */ RS_TEST_SKIPPED = 77, /**< Test neither passed or failed. */ RS_IO_ERROR = 100, /**< Error in file or network IO. */ RS_SYNTAX_ERROR = 101, /**< Command line syntax error. */ RS_MEM_ERROR = 102, /**< Out of memory. */ RS_INPUT_ENDED = 103, /**< End of input file, possibly unexpected. */ RS_BAD_MAGIC = 104, /**< Bad magic number at start of stream. Probably not a librsync file, or possibly the wrong kind of file or from an incompatible library version. */ RS_UNIMPLEMENTED = 105, /**< Author is lazy. */ RS_CORRUPT = 106, /**< Unbelievable value in stream. */ RS_INTERNAL_ERROR = 107, /**< Probably a library bug. */ RS_PARAM_ERROR = 108 /**< Bad value passed in to library, * probably an application bug. */ } rs_result; /** * Return an English description of a ::rs_result value. */ char const *rs_strerror(rs_result r); /** * \brief Performance statistics from a librsync encoding or decoding * operation. * * \sa rs_format_stats(), rs_log_stats() */ typedef struct rs_stats { char const *op; /**< Human-readable name of current * operation. For example, "delta". */ int lit_cmds; /**< Number of literal commands. */ rs_long_t lit_bytes; /**< Number of literal bytes. */ rs_long_t lit_cmdbytes; /**< Number of bytes used in literal * command headers. */ rs_long_t copy_cmds, copy_bytes, copy_cmdbytes; rs_long_t sig_cmds, sig_bytes; int false_matches; rs_long_t sig_blocks; /**< Number of blocks described by the signature. */ size_t block_len; rs_long_t in_bytes; /**< Total bytes read from input. */ rs_long_t out_bytes; /**< Total bytes written to output. */ } rs_stats_t; /** \typedef struct rs_mdfour rs_mdfour_t * * \brief MD4 message-digest accumulator. * * \sa rs_mdfour(), rs_mdfour_begin(), rs_mdfour_update(), * rs_mdfour_result() */ typedef struct rs_mdfour { int A, B, C, D; int totalN; int tail_len; unsigned char tail[64]; } rs_mdfour_t; #define RS_MD4_LENGTH 16 typedef unsigned int rs_weak_sum_t; typedef unsigned char rs_strong_sum_t[RS_MD4_LENGTH]; void rs_mdfour(unsigned char *out, void const *in, size_t); void rs_mdfour_begin(/* @out@ */ rs_mdfour_t * md); void rs_mdfour_update(rs_mdfour_t * md, void const *, size_t n); void rs_mdfour_result(rs_mdfour_t * md, unsigned char *out); char *rs_format_stats(rs_stats_t const *, char *, size_t); int rs_log_stats(rs_stats_t const *stats); typedef struct rs_signature rs_signature_t; void rs_free_sumset(rs_signature_t *); void rs_sumset_dump(rs_signature_t const *); /** * Stream through which the calling application feeds data to and from the * library. * * On each call to rs_job_iter, the caller can make available * * - avail_in bytes of input data at next_in * - avail_out bytes of output space at next_out * - some of both * * Buffers must be allocated and passed in by the caller. This * routine never allocates, reallocates or frees buffers. * * Pay attention to the meaning of the returned pointer and length * values. They do \b not indicate the location and amount of * returned data. Rather, if \p *out_ptr was originally set to \p * out_buf, then the output data begins at \p out_buf, and has length * \p *out_ptr - \p out_buf. * * Note also that if \p *avail_in is nonzero on return, then not all of * the input data has been consumed. The caller should either provide * more output buffer space and call rs_work() again passing the same * \p next_in and \p avail_in, or put the remaining input data into some * persistent buffer and call rs_work() with it again when there is * more output space. * * \param next_in References a pointer which on entry should point to * the start of the data to be encoded. Updated to point to the byte * after the last one consumed. * * \param avail_in References the length of available input. Updated to * be the number of unused data bytes, which will be zero if all the * input was consumed. May be zero if there is no new input, but the * caller just wants to drain output. * * \param next_out References a pointer which on entry points to the * start of the output buffer. Updated to point to the byte after the * last one filled. * * \param avail_out References the size of available output buffer. * Updated to the size of unused output buffer. * * \return The ::rs_result that caused iteration to stop. * * \sa rs_buffers_t * \sa \ref api_buffers */ struct rs_buffers_s { char *next_in; /**< Next input byte */ size_t avail_in; /**< Number of bytes available at next_in */ int eof_in; /**< True if there is no more data * after this. */ char *next_out; /**< Next output byte should be put there */ size_t avail_out; /**< Remaining free space at next_out */ }; /** * Stream through which the calling application feeds data to and from the * library. * * \sa struct rs_buffers_s * \sa \ref api_buffers */ typedef struct rs_buffers_s rs_buffers_t; /** Default length of strong signatures, in bytes. The MD4 checksum * is truncated to this size. */ #define RS_DEFAULT_STRONG_LEN 8 /** Default block length, if not determined by any other factors. */ #define RS_DEFAULT_BLOCK_LEN 2048 /** \typedef struct rs_job rs_job_t * * \brief Job of work to be done. * * Created by functions such as rs_sig_begin(), and then iterated * over by rs_job_iter(). */ typedef struct rs_job rs_job_t; /** * Bitmask values that may be passed to the options parameter of * rs_work(). */ typedef enum rs_work_options { RS_END = 0x01 /**< End of input file; please finish * up. */ } rs_work_options; rs_result rs_job_iter(rs_job_t *, rs_buffers_t *); typedef rs_result rs_driven_cb(rs_job_t *job, rs_buffers_t *buf, void *opaque); rs_result rs_job_drive(rs_job_t *job, rs_buffers_t *buf, rs_driven_cb in_cb, void *in_opaque, rs_driven_cb out_cb, void *out_opaque); rs_result rs_job_free(rs_job_t *); int rs_accum_value(rs_job_t *, char *sum, size_t sum_len); rs_job_t *rs_sig_begin(size_t new_block_len, size_t strong_sum_len); rs_job_t *rs_delta_begin(rs_signature_t *); rs_job_t *rs_loadsig_begin(rs_signature_t **); /** * \brief Callback used to retrieve parts of the basis file. * * \param pos Position where copying should begin. * * \param len On input, the amount of data that should be retrieved. * Updated to show how much is actually available. * * \param buf On input, a buffer of at least \p *len bytes. May be * updated to point to a buffer allocated by the callback if it * prefers. */ typedef rs_result rs_copy_cb(void *opaque, off_t pos, size_t *len, void **buf); rs_job_t *rs_patch_begin(rs_copy_cb *, void *copy_arg); rs_result rs_build_hash_table(rs_signature_t* sums); #ifndef RSYNC_NO_STDIO_INTERFACE /** * Buffer sizes for file IO. * * You probably only need to change these in testing. */ extern int rs_inbuflen, rs_outbuflen; /** * Calculate the MD4 sum of a file. * * \param result Binary (not hex) MD4 of the whole contents of the * file. */ void rs_mdfour_file(FILE *in_file, char *result); rs_result rs_sig_file(FILE *old_file, FILE *sig_file, size_t block_len, size_t strong_len, rs_stats_t *); rs_result rs_loadsig_file(FILE *, rs_signature_t **, rs_stats_t *); rs_result rs_file_copy_cb(void *arg, off_t pos, size_t *len, void **buf); rs_result rs_delta_file(rs_signature_t *, FILE *new_file, FILE *delta_file, rs_stats_t *); rs_result rs_patch_file(FILE *basis_file, FILE *delta_file, FILE *new_file, rs_stats_t *); #endif